Edgetec - Air Switch Eezi Spa Bath Blower,

Air Switch Controlled, Variable Speed, Built In Heater. Sanitiser Cycle (all spa bath blowers require a sanitiser cycle by law).

Uses your existing air line & air button. We have these items available if required.

Blower has a built in air release valve on output (valve will stop motor from burning out when only a small amount of air injectors have been fitted in the bath).

220-240 volt, Motor 600W, Heater 400W, 64db@ 1meter, Amps 4, 40mm outlet.

Push Air Button

1: High, 2: Med, 3: Low, 4: Ramping, 5: Off

Sanitiser Cycle: Turns on the blower 10 minutes after shut down and runs for 20 seconds to purge any water sitting in the air line which may otherwise become stagnant.

NOTE:  For owners that had the Onga Balboa Whispair Plus - Spa Bath Blower, you can use this Edgetec blower and connect your air tube and air button.

If the blower was used with a touchpad the Eezi Touch touchpad will have to be purchased as well and be cut into the spa bath. 

 When purchasing, tap the edit cart link to see what freight you pay.

Related Products

Recently Viewed