Filter
49 results
20
- 10
- 15
- 20
- 25
- 30
- 50
Best selling
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Vendor: GeckoHarwil flow switch replacement mechanism used on numerous spas 3/4" MPT thread - screws into barbed Tee fitting (outside diameter of thread is 26.5mm - 3/4" NPT thread) Harwil Q-12DS-C2 flow switch mechanism Max 30vAC / 60vDC Contact switch current max 0.4A, carrying current...
- $156.95
-
$0.00 - $156.95
- Unit price
- / per
Save $-156.95 -
Vendor: GeckoGecko USPA Microspa water sensor probe
- $43.95
-
$0.00 - $43.95
- Unit price
- / per
Save $-43.95 -
Vendor: Gecko25mm hole size required Gecko or Balboa temperature sensor housing for better temperature regulation. Sensor should protrude approx 8-10mm into spa water
- $50.95
-
$0.00 - $50.95
- Unit price
- / per
Save $-50.95 -
Vendor: GeckoUsed on Gecko SSPA or Spa Builders S Class flow through heater systems to connect internal pressure switch to pcb
- $23.95
-
$0.00 - $23.95
- Unit price
- / per
Save $-23.95 -
Vendor: GeckoGecko Electronics SSPA heater cable - 90mm long
- $5.95
-
$0.00 - $5.95
- Unit price
- / per
Save $-5.95 -
Vendor: GeckoConnects remote circulation heater flow or pressure switch to Gecko SSPA or Spa Builders S Class system boards.
- $16.95
-
$0.00 - $16.95
- Unit price
- / per
Save $-16.95 -
Vendor: GeckoFor Gecko MSPA-1 spa pack only - not interchangeable ** Does not suit Gecko MSPA-MP series
- $164.95
-
$0.00 - $164.95
- Unit price
- / per
Save $-164.95 -
Vendor: GeckoGecko SSPA pressure switch cable to suit remote heaters. 1.7m long cable to run from SSPA spa pack to heater pressure switch. Typically used with trombone shaped heaters or other heaters not mounted under the spa pack
- $39.95
-
$0.00 - $39.95
- Unit price
- / per
Save $-39.95 -
Vendor: GeckoGecko MSPA pressure switch cable
- $26.95
-
$0.00 - $26.95
- Unit price
- / per
Save $-26.95 -
Vendor: GeckoGecko MSPA-MP pcb power supply transformer - also suits Hydroquip CS9707 spa packs. May be marked 5-30-7003, CT-3749 5 pin primary plug / 4 pin secondary plug 240v input 12v / 23v dual output Not used on Gecko MSPA-1 white metal packs which used...
- $211.95
-
$0.00 - $211.95
- Unit price
- / per
Save $-211.95 -
Vendor: GeckoGecko Aeware IR sensor 25mm hole size required to be installed above maximum water level Use IRMT-4 Floating remote control handset (sold seperately) to control all compatable Aeware in.tune or in.chant functions in place of a standard stereo touchpad. When purchasing, tap the edit...
- $72.95
-
$0.00 - $72.95
- Unit price
- / per
Save $-72.95 -
Vendor: Gecko25mm hole size required to be installed above maximum water level Use Floating remote control handset on MSPA-MP spa controllers When purchasing, tap the edit cart link to see what freight you pay.
- $72.95
-
$0.00 - $72.95
- Unit price
- / per
Save $-72.95 -
Vendor: GeckoGecko MSPA-1 Heater mounted overtemperature hi-limit sensor When purchasing, tap the edit cart link to see what freight you pay.
- $138.95
-
$0.00 - $138.95
- Unit price
- / per
Save $-138.95 -
Vendor: Gecko650mm long lead with hi-limit sensor. Used on Gecko SSPA and Spa Builders S Class systems with remote Laing heaters as well as some Gecko MSPA-MP spa packs and Hydroquip spa packs
- $78.95
-
$0.00 - $78.95
- Unit price
- / per
Save $-78.95 -
Vendor: Gecko1.5m long lead with hi-limit sensor. Used on Gecko SSPA and Spa Builders S Class systems with remote Laing heaters as well as some Gecko MSPA-MP spa packs
- $78.95
-
$0.00 - $78.95
- Unit price
- / per
Save $-78.95 -
Vendor: GeckoGecko USPA Microspa SOLDER on Hi-Limit sensor. This is NOT a plug in sensor - it replaces the soldered on hi-limit sensor on USPA / Microspa pcbs supplied from within Australia with flow through heater tubes.
- $60.95
-
$0.00 - $60.95
- Unit price
- / per
Save $-60.95 -
Vendor: GeckoGecko SSPA flow through PCB SOLDER on Hi-Limit sensor. This is NOT a plug in sensor - it replaces the soldered on hi-limit sensor on SSPA pcbs supplied from within Australia with flow through heater tubes. Some SSPA pcbs are fitted with a hi-limit...
- $78.95
-
$0.00 - $78.95
- Unit price
- / per
Save $-78.95 -
Vendor: GeckoGecko SSPA flow through PCB plug in Hi-Limit sensor. Most SSPA pcbs actually have a soldered on style hi-limit sensor - ensure you select the correct type .
- $72.95
-
$0.00 - $72.95
- Unit price
- / per
Save $-72.95 -
Vendor: GeckoSOLDER ON Gecko MSPA flow through PCB Hi-Limit sensor.
- $72.95
-
$0.00 - $72.95
- Unit price
- / per
Save $-72.95 -
Vendor: GeckoPLUG IN Gecko MSPA flow through PCB plug in Hi-Limit sensor.
- $72.95
-
$0.00 - $72.95
- Unit price
- / per
Save $-72.95